(Extreme Duty XTP Front Sight/Muzzle brake with bayonet lug)
Available in stainless or black
Price Installed $179.95: Includes shorten barrel to 13" add XTP Unit making the weapon 16"OAL legal. Note:Available without bayonet lug to be California Legal. $179.95
above: 16" Fluted Ultra Match Barrel w/ .875” Varmint size Gas Block
above: 20" Fluted Ultra Match Varmint Barrel
above: 20" .750" Fluted Ultra Match Medium Barrel - 50/50 .900"/.750"
above: 50/50 with Fluting, Compensator and Satin Gray Finish - .875 "/.795"
Fluted 50/50 .875” to .850" Satin Gray Finish
above: Fluted .875 " Satin Gray Finish and Linear Brake
Shown with Ben Cooley brake and fluting .875” diameter barrel
Barrel Fluting Add $135.00 package price,
$175.00 if done at a later time.
<< return to top
|
| NEW Rock Solid 3 Point Steel Bedding System!!! |
<< return to top |
| Bedding Comparison |
|
| Barrel and Muzzle Crown Comparison |
A.) Competitors "claimed heavy barrel". They give you a discount and take a short cut to do it. Notice that where the gas block goes the barrel is very thin. This is a harmonic weak spot prone to barrel vibration! We do not do this.
B.) Close up of the competitor's thin spot. This other company saves you $85.00 by using your gas block, but it will cost you in accuracy.
C.) Competitor's target crown. Notice that the crown is not sharp and crisp. The barrel also looks like the end of a baseball bat.
D.) Our 11° target crown is sharp and crisp. This is a must for accuracy! The muzzle also looks more like a gun barrel.
<< return to top |
| Our .750" Diameter Medium Barrel |
1.) Our chamber is 1" thick for 4". The competitors is .900" for 2". Which chamber do you think is more rigid?
2.) This is the thinnest point of our barrel and it is still .750". No thin spot in this barrel!!
3.) Very small shoulder to give the gas block support.
Standard Match with .900" diameter, 20" Matte Black Barrel, Front Tactical Sight, Satin Stainless .900" Gas Block with Stud
<< return to top |
| Inferior Barrel |
There are other companies out there that actually call this their heavy barrel. Stay
clear you are just asking to be let down. This is one that has been sent to us to
replace with our true heavy barrel. This customer's out his $350.00. You will pay
more with us but you will be satisfied with what you get back. You pay for what
you get. |
| New Hand Guards |
| 1. |
 |
| 2. |
1) |
Composite hand guard |
$22.95 |
2) |
Factory hand guard |
$22.95 |
|
<< return to top |
| Ruger Factory Magazine |
NEW RUGER MINI 14 FACTORY 20 ROUND MAGAZINE
BEST MAGAZINES ON THE PLANET!
PRICE $64.95ea. or $59.95ea. for (2) or more!
|
| Stock Selection |
1.) A. Non-folding Ramline (14oz weight)
Price $69.95
B. Folding Ramline (14oz weight)
Price $99.95
2.) Hogue - soft over molded, 1" longer than the factory with recoil pad and sling stud
Price $89.95
3.) Butlet Creek - with recoil pad and sling stud
Price $79.95
4.) Custom Black/Gray or Brown/Brown laminate wood stock. These are beautiful.
They have 1" extra length over the factory, come with recoil pad and sling stud.
Price $129.95
4A.) Forest green Laminate wood. Same dimensions as above #4
Price $129.95
5.) Custom thumb hole stock - Black/Gray laminate, Brown/Brown
Price $295.00
6.) Tactical Synthetic - Rubber recoil pad, sling swivel and cheek rest
for proper eye alignment for those large scopes.
Price $ 119.95
7.) Tactical Synthetic - same as #6, but with no cheek rest
Price $89.00
8.) Custom Brown/Brown laminate
Price $129.95
10.) Tactical Graphite with Recoil Pad
Price $189.00
13.) Butler Creek (non-folding or folding )
Price $89.95 (Non-Folding)
Price $109.95 (Folding)
Price $39.95 Order # 13-A
Large Cheek Rest Price $59.95 #13-B
Nice quality, Very Comfortable
15.) Anchutz Style Target (Black/Gray)
Price $295.00- other colors available (add $20.00)
17.) Custom Thumb Hole (Black/Gray)
Price $295.00
18) Tactical Graphite with Adjustable cheek riser.
Price $259.95
<< return to top
High Cheek Custom
19.) ASI Custom thumbhole Nutmeg with recoil pad $239.95
20.) ASI Custom Thumbhole pepper with recoil pad $239.95
21.) MPI Tactical Light weight graphite $349.95
22.) The best synthetic stock on the market. Very rigid, Full size recoil pad, Full size rifle feel. Matte textured finish and great feeling cheek swell for proper eye alignment. $95.00
23) Adjustable Target stock Brown laminate – With adjustable Comb & Butt $239.95
|
| Front Sight |
Tactical 3 blade front sight: for heavy barrels: .800" to 1.00" diameters comes in tritium or plain (Pictured in photo above on Mini 14 barrel - shown with optional shims)
|
Tritium $80.00
Plain $70.00
|
<< return to top |
| New ASI- Fire Sight |
Unbelievable Brilliance & Clarity
Comes in High Visible Red or Green
Price installed $79.95
Can be installed on all barrel diameters! |
<< return to top |
| M1A Style Rear Sight For Mini 14 / 30 Match Model |
You asked for it! You got it!
ON SALE NOW!!
Milled Rear Sight for Ranch Rifles |
 |
1.) All steel construction milled
2.) Windage adjustable
3.) Elevation Adjustable
4.) For Mini 14/30 Ranch models only (will not fit new 58 series)
Price - $79.99 SALE PRICE $69.99 |
|
| |
Williams Match Fully Adjustable Rear Sight
1.) Fully adjustable target knobs
2.) Receiver must be drilled and tapped
3.) Works good with our our see thru rail (shown)
Price $95.00 (Installed $149.95) |
|
| |
Millet Rear Sight
* will not fit the ranch model * All Steel * Mini 14/30 |
$69.00 |
Fully adjustable rear sight for Ranch Model Mini 14/30
* All Steel |
$64.95 |
<< return to top |
| Accuracy Systems Mini 14 & 30 Tuneable Gas Block |
 
Tired of hitting the fellow 3 shooting benches down in the head and him throwing the brass back at you?
Tired of having to change gas bushings only to find you didn't get the right diameter installed and had to start the process all over again?
Our new gas system will allow you to save all the lost brass that is ejected normally 20 to 30 feet by your factory gas system.
Our new gas system will save your scope as well as your receiver during the violent impact that happens every time you fire a round off and the operating rod whacks the receiver.
Our new gas system will actually help your rifle shoot better by reducing the harmonics that are produced when the operating rod comes in contact with your receiver during high speed cycling of the operating rod.
Our new gas system can be tuned from no cycling at all for you single shot bench shooters to wide open for you high capacity magazine junkies who don't care where there brass ends up.
*Our new gas block offers a factory look but with an enhanced feature of a user friendly Quick release sling swivel hole. Instead of the unfriendly non-removable factory sling loop. Ours is even the correct width so you can use the swivel of your choice.
Installation is as easy as removing the four factory screws that hold your gas block top and bottom together. Then installing our new gas block, new gas pipe, your gas bushing and putting your four factory screws back in. We then suggest that you load up a magazine and fire a round, notice where the brass lands then adjust the tuning screw a half turn and repeat the process till the out come you desire is met.
PRICE $89.95 |
|
| Non- Adjustable Gas Block Illustrations Below
|
A.) .750" - New Style
B.) .875”
C.) 1.00 " - New Style
D.) .625"
E.) .562" |
Gas Block Pricing |
|
Installed |
Purchased Separate |
1.00" |
SS - $105.00
Blued - $98.00 |
n/a
n/a |
|
.875" |
SS - $99.00
Blued - $95.00 |
n/a
n/a |
|
.750" |
SS - $95.00
Blued - $90.00 |
n/a
n/a |
|
.625"
Ruger Factory |
SS - $69.00
Blued - $59.00 |
$69.00
$59.00 |
|
.562"
Ruger Factory |
SS - $60.00
Blued - $40.00 |
$60.00
$45.00 |
|
| |
New - Recoil Reduction Gas Bushing Kit
Complete Kit (All three) - $13.95
*Drop brass at your feet, not the next guys head!
<< return to top |
| New- Recoil Reduction Extra Power Spring |
A.) Factory Length - Price $12.95 - Replacement Only
B.) Our Extra Power - $17.95 - Ours
Works great with gas bushing kit!
|
| Mini 14/30 Extra Power Hammer Spring |
** A Must for those choosing to shoot steel cased
Wolf Ammo! Will help eliminate the misfired
rounds caused by hard primers. This spring
will give the hammer more force which in turn
will hit the firing pin harder.
PRICE $12.95
|
| Compensator Section |
New ASI 3 port maxi brake 60% felt recoil reduction!
Installed $179.95
Ben Cooley Brake / Installed $199.95
Satin Stainless heavy gas block and Varmint muzzle brake - $179.95 installed
  
A.) Linear for .900" to .936" dia. barrels .223 cal.
B.) 360° Ultra Recoil Reducer for barrel diameters from .625" to 1.00". 35% Recoil Reduction (Mini 14 or 30)
C.) Large Single Port Compensator: for barrel diameters from .750" to 1.00"
D.)AR-15 style flash hider 1/2" x 28 TPI (Threaded) $109.95
E.) AR-15 Style Compensator - installed $139.50
F.) AR-15 Style Compensator - installed $139.50
|
B.) Stainless 360° muzzle brake .750" to 1.10" (most effective brake available)
D.) Flash hider AR style 1/2" X 28 TPI
E.) AK style
F.) Varmint brake (no dust print)
G.) Linear brake (keeps noise down range) (Very Effective - Our Best Seller!)
* Ask about discounts on brakes when we do your barrel conversion |
|
| Scope Mounts |
| A |
Finally a strong ridged see thru side mount fits all models of the
Mini 14 or 30!
Price $99.95
|
| B |
ASI Mini 14 or 30 Ranch Rifle 4 7/8" Scope Rail. $79.99 Black Only.
|
| |
 |
ASI Mini 14/30
Ranch Scope Rail
$79.99 Black Only
| C |
 |
| |
| Urban Brawler Full Rail Mini 14/30 |
• See Thru
• Easy to install
• Black only
• Fits Factory barrel only
• Complete Kit & Rail-------$109.50 |
|
| D |
Rifle shown with Urban Brawler full rail |
| E |
 |
| |
Scout Mount for extended eye relief scopes (Weaver Rail)
* Can still use open sights |
$70.00 black
$80.00 stainless
|
|
| G |
 |
| |
for Older Standard Mini 14 Rifle - Weaver style 2 slot mount drilled and tapped - $110.00 (installed)
|
| H |
MINI 14/30 ACCESSORY RAILS for Ranch Rifles
H - Top - 10.5" extends from just in front of the rear sight to just 2" behind the gas block. Very Ridged! $99.95
H - Middle - 6.5" extends over the rear sight and .750" over the front of the receiver. $99.95 (All steel Coming soon)
|
| |
|
I
|
 |
| |
Scout mount rail with modified hand guard.
Price installed - $145.00 |
<<return to top |
| Trigger Enhancements |
New enhanced trigger shoe gives a felt 1 LB reduction in trigger pull
Price $35.00
1.) Trigger enhancement Installed $35.00
2.) Over travel set screw (nice and neat out of the way of the rear of the trigger)
3.) Trigger job 3.5 lb. or 2.5 lb., no creep. with over travel set screw installed in the trigger housing
3.5 lb. - $59.95
2.5 lb. - $94.95 |
<< return to top |
| Miscellaneous |
|
| New Extended Magazine Release |
| $24.95 - Blued |
| $27.95 Stainless |
| $10.00 Installed |
OURS
Ruger® FACTORY |
 |
Shock Buffer (Saves scope and receiver)
Price $17.95
<< return to top
|
