• Made in the USA. (You really get what you pay for. Do not cut corners on scope bases)
• Strong Aircraft Grade Alloy then hard anodized for long lasting use.
• A) Very secure mounting system which utilizes a Dual 3MM steel bottom dowel pins which engage into the receivers top front and rear scope grooves to stop any forward or rearward shifting of the scope base under recoil.
• B) The Side attachment screws clamp on the receivers side scope attachment cuts making this a very rigid mounting platform.
• The scope base is wind-age adjustable.
• Scope base comes in Black or Stainless colors.
• Two scope base lengths giving you a wider range of mounting options 5.625" or 7.25"
• Fits All Ranch Model - Mini 14, Mini 30, 6.8, Target, 300 Blackout, Tactical models.
• No drilling or tapping easy to install.
• Allen wrench is included.

• Available in 6.875" & 5.375" lengths (for Non Ranch Model).
• MADE IN THE USA. Strong Alloy then hard anodized for superior strength.
• 6.875" Extends rearward 1.5" farther than standard 5.375" mount as shown above.
• Accepts Weaver & Picintiny scope rings.
• Fits All NON Ranch Mini 14s 180 Thru 189 Serial number prefixes.
• Can be easily installed without any gunsmithing!
• You remove your existing rear sight and utilize the existing holes in the receiver to mount the scope base.
• There is a optional hole in the front of the Mount for additional strength by drilling then tapping the receiver and attaching the mount.
• You local Gunsmith should be able to drill & tap. If not you can call us.

$79.99 180 Serial Number Prefix Only Non-Ranch-Base-5.375-180BLK Non-Ranch-Base-5.375-180SS Non-Ranch-Base-6.875-180BLK Non-Ranch-Base-6.875-180SS

$79.99 181 Thru 189 Serial Number Prefixs Non-Ranch-Base-5.375-181BLK Non-Ranch-Base-5.375-181SS Non-Ranch-Base-6.875-181BLK Non-Ranch-Base-6.875-181SS

Buy Now

Pictured above is our Old Design Rearward Mount. We left the picture so you can see how the old and New mount can be used with a Prism scope such as a Burris AR 532 Or any other scope where eye relief is limited *Shown - 7.25" Length Extends 1" Past rear of receiver.
**Scope or rifle not included Just for illustration.

• Made in the USA. (You really get what you pay for. Do not cut corners on scope bases)
• Strong Aircraft Grade Alloy then hard anodized for long lasting use.
• A) Very secure mounting system which utilizes a Dual 3MM steel bottom dowel pins which engage into the receivers top front and rear scope grooves to stop any forward or rearward shifting of the scope base under recoil.
• B) The Side attachment screws clamp on the receivers side scope attachment cuts making this a very rigid mounting platform.
• The scope base is wind-age adjustable.
• Scope base comes in Black or Stainless colors.
• Two scope base lengths giving you a wider range of mounting options 6" or 7.25"
• Fits All Ranch rifle models Pre and Post 580 Series, Mini 14, Mini 30, 6.8, Target, 300 Blackout and Tactical models.
• No drilling or tapping easy to install.Allen wrench is included.
• 6" (Actual length is 5.625") extends 1" shy with being flush with the rear of receiver and 7.25" extends 1" past end of receiver.

• Use Iron & Optic Sights Without Reconfiguration
• Low profile mount clamps directly to the barrel for added stability.
• Positioned below the line of sight - no need to use a raised cheek-piece for proper hold. MIL STD 1913 Pica tinny rail.
• No gunsmithing, drop-in installation.

SPECS: 7075-T6 aluminum, Mil-Spec hardcoat anodized, matte black finish. Includes mounting screws and illustrated instructions.
Mini-14® - 103⁄8" (26.4cm) long. Fits Standard and Ranch rifles. Fits rifles with pre-580 serial number prefix. .562" diameter barrels.
Mini Thirty® - Fits all Mini Thirty rifles manufactured before 2008 with factory original barrel. M4S model® - must be used with tip-on optic/rings. .625" Straight NON- Tapered barrels.
Mini-14s made since circa 2008. Also fits Mini-30's, from early production to present. Will not fit models with target barrels.

See Barrel Taper Above Fits All Mini 14 Post 581 , All Mini 30s 189 thru Current.

See Barrel Strait Above Ruger Mini 14 Pre-581 Fits serial numbers 180 thru 580.

Order Number - Mini 14 pre-580 (.562" diameter barrels.)
Order Number - Mini 30 pre-580 (Extended Mount for Straight Non- tapered barrels)
Order Number - Mini 30 580 and Up (Serial Numbers from early production to present, as well as current production Minis in 6.8 and 300BLK.)

Buy Now